Messages posted by: lanh_co_doc

Chào các bác!
Bây giờ em có 1 máy tính cài window xp, muốn tìm hiểu xem những phiên làm việc trước mình đã sử dụng những ứng dụng nào, mở những tài liệu gì, ai là người đăng nhập vào máy tính thì có phần mềm nào có thể giải quyết vấn đề này không.
Nếu mình cài phần mềm đó vào sáng hôm nay thì có thể xem được những hành động mà trước khi mình cài đặt phần mềm vào hay không?

Cảm ơn các bác.

E làm xong bước đó rồi nhưng đến phần biên dịch nhân . làm theo hướng dẫn

Trong ví dụ tới chúng tôi sẽ cài sparc-sources. Dĩ nhiên bạn phải thay thế nó bằng kernel bạn chọn, đây chỉ là ví dụ thôi. Dùng USE="-doc" nếu cần để tránh phụ thuộc vào gói xorg-x11 và các phụ thuộc khác lúc này. USE="symlink" không cần cho cài đặt mới, nhưng bảo đảm sẽ tạo đúng symlink /usr/src/linux.

Mã 2: Cài đặt mã nguồn kernel

# USE="-doc symlink" emerge sparc-sources

Hãy xem trong /usr/src, bạn sẽ thấy một symlink tên là linux trỏ đến mã nguồn kernel của bạn. Trong trường hợp này, kernel source trỏ đến sparc-sources-2.4.31. Phiên bản của bạn có thể khác, đừng nhầm lẫn.

Mã 3: Xem liên kết mã nguồn kernel

# ls -l /usr/src/linux
lrwxrwxrwx 1 root root 12 Oct 13 11:04 /usr/src/linux -> linux-2.4.31-sparc

thì không tạo ra được cái symlink kia . Ai giúp e với

Hi các anh . Em đang cài gentoo và đến bước cài stage. lúc download nó báo lỗi thế này

Could not create file stage3-i686-2011004.tar.bzip.bz2 : No space left on device

Em đã thử mount đi mount lại . làm y như hướng dẫn ở trên trang mà vẫn không được . Mong các anh giúp đỡ

Thanks !

Vâng . Cảm ơn anh đã tư vấn giúp em smilie

Theo a Conmale thì muốn làm làm quản trị hệ thống . ngoài việc thông thạo giao thức TCp/IP , 1 HĐH Linux . Ngoài ra mình phải cần những gì . đương nhiên chỉ trong phạm vi của quản trị hệ thống thôi . e chưa muốn cao cấp hơn :d . Cái gì cũng phải từ từ mà a.

Mọi người góp ý cho mình với .

Thanks!!!

Mình đang muốn học linux và quản trị hệ thống linux . Nhưng chưa biết đọc sách gì . Vì nhiều sách quá . Không biết đọc cuốn nào . Theo các anh chị và các bạn . Nên đọc những cuốn nào . để có thể đi sâu vào linux được. Có nên đọc LPI hay không.

Cảm ơn mọi người

Thanks anh quanta nhé và anh secmask nhé :X . Em làm đc rồi . Cảm ơn các anh đã giúp đỡ smilie

Vâng .

Em đã cài trên Ubuntu và CrunchBang đều không đựoc .
Đây là đoạn log của máy em

X.Org X Server 1.7.7
Release Date: 2010-05-04
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32.29-dsa-ia32 i686 Debian
Current Operating System: Linux lanhcodoc 2.6.36-2.dmz.5-liquorix-686 #1 ZEN SMP PREEMPT Wed Dec 15 03:28:54 UTC 2010 i686
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.36-2.dmz.5-liquorix-686 root=UUID=1c8c8f5b-5d1c-4049-9a11-b6fecf9470f1 ro quiet splash
Build Date: 19 February 2011 02:37:36PM
xorg-server 2:1.7.7-13 (Cyril Brulebois <kibi@debian.org> smilie

Current version of pixman: 0.16.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (= smilie

default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(= smilie

Log file: "/var/log/Xorg.0.log", Time: Sat Jul 16 08:42:39 2011
(= smilie

Using system config directory "/usr/share/X11/xorg.conf.d"
(= smilie

No Layout section. Using the first Screen section.
(= smilie

No screen section available. Using defaults.
(**) |-->Screen "Default Screen Section" (0)
(**) | |-->Monitor "<default monitor>"
(= smilie

No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
(= smilie

Automatically adding devices
(= smilie

Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(= smilie

FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
(= smilie

ModulePath set to "/usr/lib/xorg/modules"
(II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
(II) Loader magic: 0x81ecca0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(++) using VT number 7

(--) PCI:*(0:0:2:0) 8086:0046:1025:035b Intel Corporation Core Processor Integrated Graphics Controller rev 24, Mem @ 0xb1400000/4194304, 0xa0000000/268435456, I/O @ 0x00004050/8
(--) PCI: (0:1:0:0) 10de:0a75:1025:035b nVidia Corporation GT218 [GeForce 310M] rev 162, Mem @ 0xb0000000/16777216, 0x80000000/268435456, 0x90000000/33554432, I/O @ 0x00003000/128, BIOS @ 0x????????/524288
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Server Extension
(II) NVIDIA GLX Module 195.36.31 Tue Jun 1 23:22:44 PDT 2010
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(= smilie

Matched intel as autoconfigured driver 0
(= smilie

Matched vesa as autoconfigured driver 1
(= smilie

Matched fbdev as autoconfigured driver 2
(= smilie

Assigned the driver to the xf86ConfigLayout
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 2.13.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "vesa"
(II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 2.3.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "fbdev"
(II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
(II) Module fbdev: vendor="X.Org Foundation"
compiled for 1.7.6.901, module version = 0.4.2
ABI class: X.Org Video Driver, version 6.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge,
Sandybridge, Sandybridge
(II) VESA: driver for VESA chipsets: vesa
(II) FBDEV: driver for framebuffer: fbdev
(II) Primary Device is: PCI 00@00:02:0
(WW) Falling back to old probe method for vesa
(WW) Falling back to old probe method for fbdev
(II) Loading sub module "fbdevhw"
(II) LoadModule: "fbdevhw"
(II) Loading /usr/lib/xorg/modules/linux/libfbdevhw.so
(II) Module fbdevhw: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 0.0.2
ABI class: X.Org Video Driver, version 6.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: drmOpenMinor returns 8
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
(= smilie

intel(0): Depth 24, (--) framebuffer bpp 32
(= smilie

intel(0): RGB weight 888
(= smilie

intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) Arrandale
(--) intel(0): Chipset: "Arrandale"
(**) intel(0): Tiling enabled
(**) intel(0): SwapBuffers wait enabled
(= smilie

intel(0): video overlay key set to 0x101fe
(II) intel(0): Output LVDS1 has no monitor section
(II) intel(0): found backlight control interface /sys/class/backlight/acpi_video1
(II) intel(0): Output VGA1 has no monitor section
(II) intel(0): Output HDMI1 has no monitor section
(II) intel(0): Output DP1 has no monitor section
(II) intel(0): EDID for output LVDS1
(II) intel(0): Manufacturer: AUO Model: 40ec Serial#: 1
(II) intel(0): Year: 2009 Week: 1
(II) intel(0): EDID Version: 1.3
(II) intel(0): Digital Display Input
(II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 19
(II) intel(0): Gamma: 2.20
(II) intel(0): No DPMS capabilities specified
(II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.577 redY: 0.333 greenX: 0.333 greenY: 0.554
(II) intel(0): blueX: 0.161 blueY: 0.144 whiteX: 0.313 whiteY: 0.329
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported detailed timing:
(II) intel(0): clock: 71.9 MHz Image Size: 344 x 193 mm
(II) intel(0): h_active: 1366 h_sync: 1374 h_sync_end 1384 h_blank_end 1544 h_border: 0
(II) intel(0): v_active: 768 v_sync: 771 v_sync_end 772 v_blanking: 776 v_border: 0
(II) intel(0): Unknown vendor-specific block f
(II) intel(0): AUO
(II) intel(0): B156XW04 V0
(II) intel(0): EDID (in hex):
(II) intel(0): 00ffffffffffff0006afec4001000000
(II) intel(0): 01130103802213780ad7759355558d29
(II) intel(0): 24505400000001010101010101010101
(II) intel(0): 010101010101151c56b250000830080a
(II) intel(0): 310058c1100000180000000f00000000
(II) intel(0): 00000000000000000020000000fe0041
(II) intel(0): 554f0a202020202020202020000000fe
(II) intel(0): 004231353658573034205630200a007e
(II) intel(0): EDID vendor "AUO", prod id 16620
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1366x768"x0.0 71.89 1366 1374 1384 1544 768 771 772 776 -hsync -vsync (46.6 kHz)
(II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
(II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
(II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
(II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
(II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
(II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
(II) intel(0): Printing probed modes for output LVDS1
(II) intel(0): Modeline "1366x768"x60.0 71.89 1366 1374 1384 1544 768 771 772 776 -hsync -vsync (46.6 kHz)
(II) intel(0): Modeline "1360x768"x59.8 84.75 1360 1432 1568 1776 768 771 781 798 -hsync +vsync (47.7 kHz)
(II) intel(0): Modeline "1360x768"x60.0 72.00 1360 1408 1440 1520 768 771 781 790 +hsync -vsync (47.4 kHz)
(II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): EDID for output VGA1
(II) intel(0): EDID for output HDMI1
(II) intel(0): EDID for output DP1
(II) intel(0): Output LVDS1 connected
(II) intel(0): Output VGA1 disconnected
(II) intel(0): Output HDMI1 disconnected
(II) intel(0): Output DP1 disconnected
(II) intel(0): Using exact sizes for initial modes
(II) intel(0): Output LVDS1 using initial mode 1366x768
(II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
(II) intel(0): Kernel page flipping support detected, enabling
(**) intel(0): Display dimensions: (340, 190) mm
(**) intel(0): DPI set to (102, 102)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) UnloadModule: "vesa"
(II) Unloading /usr/lib/xorg/modules/drivers/vesa_drv.so
(II) UnloadModule: "fbdev"
(II) Unloading /usr/lib/xorg/modules/drivers/fbdev_drv.so
(II) UnloadModule: "fbdevhw"
(II) Unloading /usr/lib/xorg/modules/linux/libfbdevhw.so
(= smilie

Depth 24 pixmap format is 32 bpp
(= smilie

intel(0): VideoRam: 262144 KB
(II) intel(0): [DRI2] Setup complete
(II) intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled
(II) UXA(0): Driver registered support for the following operations:
(II) solid
(II) copy
(II) composite (RENDER acceleration)
(II) put_image
(II) get_image
(= smilie

intel(0): Backing store disabled
(= smilie

intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(= smilie

intel(0): DPMS enabled
(= smilie

intel(0): Intel XvMC decoder enabled
(II) intel(0): Set up textured video
(II) intel(0): [XvMC] xvmc_vld driver initialized.
(II) intel(0): direct rendering: DRI2 Enabled
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
SELinux: Disabled on system, not enabling in X server
(EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found)
(II) intel(0): Setting screen physical size to 361 x 203
(II) config/udev: Adding input device Power Button (/dev/input/event4)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.7.6.901, module version = 2.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event4"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device Video Bus (/dev/input/event5)
(**) Video Bus: Applying InputClass "evdev keyboard catchall"
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event5"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device Power Button (/dev/input/event1)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event1"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device Lid Switch (/dev/input/event2)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Sleep Button (/dev/input/event3)
(**) Sleep Button: Applying InputClass "evdev keyboard catchall"
(**) Sleep Button: always reports core events
(**) Sleep Button: Device: "/dev/input/event3"
(II) Sleep Button: Found keys
(II) Sleep Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device Video Bus (/dev/input/event6)
(**) Video Bus: Applying InputClass "evdev keyboard catchall"
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event6"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device 1.3M WebCam (/dev/input/event7)
(**) 1.3M WebCam: Applying InputClass "evdev keyboard catchall"
(**) 1.3M WebCam: always reports core events
(**) 1.3M WebCam: Device: "/dev/input/event7"
(II) 1.3M WebCam: Found keys
(II) 1.3M WebCam: Configuring as keyboard
(II) XINPUT: Adding extended input device "1.3M WebCam" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
(**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event9)
(**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
(**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 1.7.6.901, module version = 1.2.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(II) Synaptics touchpad driver version 1.2.2
(**) Option "Device" "/dev/input/event9"
(II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5682
(II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4692
(II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
(II) SynPS/2 Synaptics TouchPad: finger width range 0 - 15
(II) SynPS/2 Synaptics TouchPad: buttons: left right
(--) SynPS/2 Synaptics TouchPad: touchpad found
(**) SynPS/2 Synaptics TouchPad: always reports core events
(II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
(**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
(**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 0
(**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
(**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
(**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
(II) Synaptics touchpad driver version 1.2.2
SynPS/2 Synaptics TouchPad no synaptics event device found
(**) Option "Device" "/dev/input/mouse0"
Query no Synaptics: 6003C8
(--) SynPS/2 Synaptics TouchPad: no supported touchpad found
(EE) SynPS/2 Synaptics TouchPad Unable to query/initialize Synaptics hardware.
(EE) PreInit failed for input device "SynPS/2 Synaptics TouchPad"
(II) UnloadModule: "synaptics"
(II) config/udev: Adding input device PC Speaker (/dev/input/event8)
(II) No input driver/identifier specified (ignoring)
(II) intel(0): EDID vendor "AUO", prod id 16620
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1366x768"x0.0 71.89 1366 1374 1384 1544 768 771 772 776 -hsync -vsync (46.6 kHz)
(II) intel(0): EDID vendor "AUO", prod id 16620
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1366x768"x0.0 71.89 1366 1374 1384 1544 768 771 772 776 -hsync -vsync (46.6 kHz)

Số là thế này :

E có con Lap acer Aspire 5745G , card Geforce 310M , chạy Linux . E đã tìm hiểu nhiều cách cài đặt trong các forum mà chẳng cách nào được . kiểu gì cũng bị black screen . Anh em nào cài thành công cái này vào giúp em với .

Thanks!!

Có cao thủ nào vào gợi ý cho bạn ý phát . theo mình thì nên làm lí thuyết 1 cách vắn tắt thôi. nói lan man nhiều => hỏi => die . tập trung vào demo vài cái là ok ?
mang tính chất tìm hiểu thì không cần phải sâu sắc lắm . đúng ko các bác

Mình đang phải tìm hiểu về cái này . Các anh chị , các bạn có tài liệu gì về vmware vsphere cho mình xin .

Cảm ơn mọi người !