$USER2$=/usr/local/nagios/libexec/event_handlers

LOGFILE=/usr/local/nagios/libexec/event_handlers/log.txt
echo "Restart Automatic Updates" >$LOGFILE
echo $1 >>$LOGFILE
echo $2 >>$LOGFILE

log_event_handlers=1
enable_event_handlers=1

/usr/local/nagios/libexec/check_nrpe -H $HOSTNAME -c autoupdate

LOGFILE=/usr/local/nagios/libexec/event_handlers/log.txt
echo "Restart Automatic Updates" >$LOGFILE
echo $1 >>$LOGFILE
echo $2 >>$LOGFILE

HOSTNAME=$2

echo $1
#if [ "$1" == "CRITICAL" ] ; then
	echo -n "Restarting Automatic Updates..."
	/usr/local/nagios/libexec/check_nrpe -H $HOSTNAME -c autoupdate
#fi

# ./autoupdate CRITICAL 192.168.11.15
CRITICAL
Restarting Automatic Updates...
D:\Program Files\NSClient++>net start wuauserv 
The Automatic Updates service is starting.
The Automatic Updates service was started successfully.
#

[modules]

;# NSCLIENT++ MODULES

;# A list with DLLs to load at startup.

;  You will need to enable some of these for NSClient++ to work.

; ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! !

; *                                                               *

; * N O T I C E ! ! ! - Y O U   H A V E   T O   E D I T   T H I S *

; *                                                               *

; ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! !

FileLogger.dll

CheckSystem.dll

CheckDisk.dll

NSClientListener.dll

NRPEListener.dll

SysTray.dll

CheckEventLog.dll

CheckHelpers.dll

CheckWMI.dll

;

; RemoteConfiguration IS AN EXTREM EARLY IDEA SO DONT USE FOR PRODUCTION ENVIROMNEMTS!

;RemoteConfiguration.dll

; NSCA Agent is a new beta module use with care!

;NSCAAgent.dll

; LUA script module used to write your own "check deamon" (sort of) early beta.

LUAScript.dll

; Script to check external scripts and/or internal aliases, early beta.

CheckExternalScripts.dll

; Check other hosts through NRPE extreme beta and probably a bit dangerous! :)

NRPEClient.dll

; Extreamly early beta of a task-schedule checker

;CheckTaskSched.dll







[Settings]

;# OBFUSCATED PASSWORD

;  This is the same as the password option but here you can store the password in an obfuscated manner.

;  *NOTICE* obfuscation is *NOT* the same as encryption, someone with access to this file can still figure out the 

;  password. Its just a bit harder to do it at first glance.

;obfuscated_password=Jw0KAUUdXlAAUwASDAAB

;

;# PASSWORD

;  This is the password (-s) that is required to access NSClient remotely. If you leave this blank everyone will be able to access the daemon remotly.

;password=secret-password

;

;# ALLOWED HOST ADDRESSES

;  This is a comma-delimited list of IP address of hosts that are allowed to talk to the all daemons.

;  If leave this blank anyone can access the deamon remotly (NSClient still requires a valid password).

;  The syntax is host or ip/mask so 192.168.0.0/24 will allow anyone on that subnet access

allowed_hosts=192.168.0.0/24

;

;# USE THIS FILE

;  Use the INI file as opposed to the registry if this is 0 and the use_reg in the registry is set to 1 

;  the registry will be used instead.

use_file=1

;

; # USE SHARED MEMORY CHANNELS

;  This is the "new" way for using the system tray based on an IPC framework on top shared memmory channels and events.

;  It is brand new and (probably has bugs) so dont enable this unless for testing!

;  If set to 1 shared channels will be created and system tray icons created and such and such...

;shared_session=0





[log]

;# LOG DEBUG

;  Set to 1 if you want debug message printed in the log file (debug messages are always printed to stdout when run with -test)

;debug=1

;

;# LOG FILE

;  The file to print log statements to

;file=nsclient.log

;

;# LOG DATE MASK

;  The format to for the date/time part of the log entry written to file.

;date_mask=%Y-%m-%d %H:%M:%S

;

;# LOG ROOT FOLDER

;  The root folder to use for logging.

;  exe = the folder where the executable is located

;  local-app-data = local application data (probably a better choice then the old default)

;root_folder=exe





[NSClient]

;# ALLOWED HOST ADDRESSES

;  This is a comma-delimited list of IP address of hosts that are allowed to talk to NSClient deamon.

;  If you leave this blank the global version will be used instead.

allowed_hosts=192.168.11.14

;

;# NSCLIENT PORT NUMBER

;  This is the port the NSClientListener.dll will listen to.

port=12489

;

;# BIND TO ADDRESS

;  Allows you to bind server to a specific local address. This has to be a dotted ip adress not a hostname.

;  Leaving this blank will bind to all avalible IP adresses.

;bind_to_address=

;

;# SOCKET TIMEOUT

;  Timeout when reading packets on incoming sockets. If the data has not arrived withint this time we will bail out.

;socket_timeout=30



[NRPE]

;# NRPE PORT NUMBER

;  This is the port the NRPEListener.dll will listen to.

port=5666

;

;# COMMAND TIMEOUT

;  This specifies the maximum number of seconds that the NRPE daemon will allow plug-ins to finish executing before killing them off.

command_timeout=60

;

;# COMMAND ARGUMENT PROCESSING

;  This option determines whether or not the NRPE daemon will allow clients to specify arguments to commands that are executed.

allow_arguments=1

;

;# COMMAND ALLOW NASTY META CHARS

;  This option determines whether or not the NRPE daemon will allow clients to specify nasty (as in |`&><'"\[]{}) characters in arguments.

;allow_nasty_meta_chars=0

;

;# USE SSL SOCKET

;  This option controls if SSL should be used on the socket.

;use_ssl=1

;

;# BIND TO ADDRESS

;  Allows you to bind server to a specific local address. This has to be a dotted ip adress not a hostname.

;  Leaving this blank will bind to all avalible IP adresses.

; bind_to_address=

;

;# ALLOWED HOST ADDRESSES

;  This is a comma-delimited list of IP address of hosts that are allowed to talk to NRPE deamon.

;  If you leave this blank the global version will be used instead.

allowed_hosts=192.168.11.14

;

;# SCRIPT DIRECTORY

;  All files in this directory will become check commands.

;  *WARNING* This is undoubtedly dangerous so use with care!

script_dir=D:\Program Files\NSClient++\scripts\*.*

;

;# SOCKET TIMEOUT

;  Timeout when reading packets on incoming sockets. If the data has not arrived withint this time we will bail out.

;socket_timeout=30



[Check System]

;# CPU BUFFER SIZE

;  Can be anything ranging from 1s (for 1 second) to 10w for 10 weeks. Notice that a larger buffer will waste memory 

;  so don't use a larger buffer then you need (ie. the longest check you do +1).

CPUBufferSize=1h

;

;# CHECK RESOLUTION

;  The resolution to check values (currently only CPU).

;  The value is entered in 1/10:th of a second and the default is 10 (which means ones every second)

;CheckResolution=10

;

;# CHECK ALL SERVICES

;  Configure how to check services when a CheckAll is performed.

;  ...=started means services in that class *has* to be running.

;  ...=stopped means services in that class has to be stopped.

;  ...=ignored means services in this class will be ignored.

check_all_services[SERVICE_BOOT_START]=ignored

check_all_services[SERVICE_SYSTEM_START]=ignored

check_all_services[SERVICE_AUTO_START]=started

check_all_services[SERVICE_DEMAND_START]=ignored

check_all_services[SERVICE_DISABLED]=stopped



[External Script]

;# COMMAND TIMEOUT

;  This specifies the maximum number of seconds that the NRPE daemon will allow plug-ins to finish executing before killing them off.

;command_timeout=60

;

;# COMMAND ARGUMENT PROCESSING

;  This option determines whether or not the NRPE daemon will allow clients to specify arguments to commands that are executed.

;allow_arguments=0

;

;# COMMAND ALLOW NASTY META CHARS

;  This option determines whether or not the NRPE daemon will allow clients to specify nasty (as in |`&><'"\[]{}) characters in arguments.

;allow_nasty_meta_chars=0

;

;# COMMAND ALLOW NASTY META CHARS

;  This option determines whether or not the NRPE daemon will allow clients to specify nasty (as in |`&><'"\[]{}) characters in arguments.

;script_dir=c:\my\script\dir



[External Scripts]

;check_es_long=scripts\long.bat

;check_es_ok=scripts\ok.bat

;check_es_nok=scripts\nok.bat

;check_vbs_sample=cscript.exe //T:30 //NoLogo scripts\check_vb.vbs

;check_powershell_warn=cmd /c echo scripts\powershell.ps1 | powershell.exe -command -



[External Alias]

;alias_cpu=checkCPU warn=80 crit=90 time=5m time=1m time=30s

;alias_disk=CheckDriveSize MinWarn=10% MinCrit=5% CheckAll FilterType=FIXED

;alias_service=checkServiceState CheckAll

;alias_mem=checkMem MaxWarn=80% MaxCrit=90% ShowAll type=physical

;alias_event_log=CheckEventLog file=application file=system filter=new filter=out MaxWarn=1 MaxCrit=1 filter-generated=>2d filter-severity==success filter-severity==informational truncate=1023 unique descriptions  "syntax=%severity%: %source%: %message% (%count%)"











; [includes]

;# The order when used is "reversed" thus the last included file will be "first"

;# Included files can include other files (be carefull only do basic recursive checking)

;

; myotherfile.ini

; real.ini





[NSCA Agent]

;# CHECK INTERVALL (in seconds)

;   How often we should run the checks and submit the results.

interval=5

;

;# ENCRYPTION METHOD

;   This option determines the method by which the send_nsca client will encrypt the packets it sends 

;   to the nsca daemon. The encryption method you choose will be a balance between security and 

;   performance, as strong encryption methods consume more processor resources.

;   You should evaluate your security needs when choosing an encryption method.

;

; Note: The encryption method you specify here must match the decryption method the nsca daemon uses 

;       (as specified in the nsca.cfg file)!!

; Values:

;	0 = None	(Do NOT use this option)

;	1 = Simple XOR  (No security, just obfuscation, but very fast)

;   2 = DES

;   3 = 3DES (Triple DES)

;	4 = CAST-128

;	6 = xTEA

;	8 = BLOWFISH

;	9 = TWOFISH

;	11 = RC2

;	14 = RIJNDAEL-128 (AES)

;	20 = SERPENT

;encryption_method=14

;

;# ENCRYPTION PASSWORD

;  This is the password/passphrase that should be used to encrypt the sent packets. 

;password=

;

;# BIND TO ADDRESS

;  Allows you to bind server to a specific local address. This has to be a dotted ip adress not a hostname.

;  Leaving this blank will bind to "one" local interface.

; -- not supported as of now -- 

;bind_to_address=

;

;# LOCAL HOST NAME

;  The name of this host (if empty "computername" will be used.

;hostname=

;

;# NAGIOS SERVER ADDRESS

;  The address to the nagios server to submit results to.

;nsca_host=192.168.11.14

;

;# NAGIOS SERVER PORT

;  The port to the nagios server to submit results to.

;nsca_port=5667

;



;# CHECK COMMAND LIST

;  The checks to run everytime we submit results back to nagios

;  Any command(alias/key) starting with a host_ is sent as HOST_COMMAND others are sent as SERVICE_COMMANDS

;  where the alias/key is used as service name.

;

[NSCA Commands]

my_cpu_check=checkCPU warn=80 crit=90 time=20m time=10s time=4

my_mem_check=checkMem MaxWarn=80% MaxCrit=90% ShowAll type=page

my_svc_check=checkServiceState CheckAll exclude=wampmysqld exclude=MpfService

host_check=check_ok



[NRPE Handlers]

;# COMMAND DEFINITIONS

;# Command definitions that this daemon will run.

;# Can be either NRPE syntax:

;command[check_users]=/usr/local/nagios/libexec/check_users -w 5 -c 10

;# Or simplified syntax:

;test=c:\test.bat foo $ARG1$ bar

;check_disk1=/usr/local/nagios/libexec/check_disk -w 5 -c 10

;# Or even loopback (inject) syntax (to run internal commands)

;# This is a way to run "NSClient" commands and other internal module commands such as check eventlog etc.

;check_cpu=inject checkCPU warn=80 crit=90 5 10 15

;check_eventlog=inject CheckEventLog Application warn.require.eventType=error warn.require.eventType=warning critical.require.eventType=error critical.exclude.eventType=info truncate=1024 descriptions

;check_disk_c=inject CheckFileSize ShowAll MaxWarn=1024M MaxCrit=4096M File:WIN=c:\ATI\*.*

;# But be careful:

; dont_check=inject dont_check This will "loop forever" so be careful with the inject command...

;# Check some escapings...

; check_escape=inject CheckFileSize ShowAll MaxWarn=1024M MaxCrit=4096M "File: foo \" WIN=c:\\WINDOWS\\*.*"

;# Some real world samples

;nrpe_cpu=inject checkCPU warn=80 crit=90 5 10 15

;nrpe_ok=scripts\ok.bat

;check_multi_line=scripts\multi_line.bat

;#

;# The sample scripts

;#

;check_long=scripts\long.bat

;check_ok=scripts\ok.bat

;check_nok=scripts\xlong.bat

;check_vbs=cscript.exe //T:30 //NoLogo scripts\check_vb.vbs

autoupdate=D:\Program Files\NSClient++\scripts\autoupdate.bat



;# REMOTE NRPE PROXY COMMANDS

;  A list of commands that check other hosts.

;  Used by the NRPECLient module

[NRPE Client Handlers]

check_other=-H 192.168.0.1 -p 5666 -c remote_command -a arguments



;# LUA SCRIPT SECTION

;  A list of all Lua scripts to load.

;[LUA Scripts]

;scripts\test.lua

http://www.nagiosexchange.org/cgi-bin/page.cgi?g=Detailed%2F2639.html;d=1

http://www.nagiosexchange.org/cgi-bin/jump.cgi?ID=1471&view=File1;d=1

define command{
        command_name    restart-autoupdate
        command_line    $USER2$/autoupdate $SERVICESTATE$ $HOSTADDRESS$
        }

#!/bin/bash

case "$1" in
    OK)
        ;;
    WARNING)
        ;;
    UNKNOWN)
        ;;
    CRITICAL)
        /usr/local/nagios/libexec/check_nrpe -H $2 -c autoupdate
        ;;
esac

exit 0